Samsung ER-4615 Error E1 - H.E.L.P
Cash register free support and advice: Instruction manuals: Samsung ER-4615 Error E1 - H.E.L.P
  Subtopic Posts   Updated
Top of pagePrevious messageNext messageBottom of pageLink to this message   By BEN SKILLING on Wednesday, May 18, 2005 - 11:54 am:

WOULD ANY1 KNOW HOW 2 PROGRAM A %17.5 VAT ONTO THE SUBTOTAL BUTTON FOR A SAMSUNG ER-4615? AS IN WHEN THEY PRESS THE SUBTOTAL BUTTON %17.5 IS AUTOMATICALLY CHARGED! THANKS!

Top of pagePrevious messageNext messageBottom of pageLink to this message   By www.cashregistergroup.com on Wednesday, November 10, 2004 - 09:24 am:

Samsung ER 4615 faults.

Check your buttons !

It sounds linke one of the buttons are stuck down.
If none are stuck, check the springs underneath, one of them will be mis-shaped.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Smuttyangel on Tuesday, November 09, 2004 - 08:31 pm:

Second hand Cash register, programmed fine, then went to switch on one day and nothing works! No key press is responding to anything, no sound from keypad. When try to hard re-set, by holding down subtotal key and turn on (key in Service mode position as instructed) as soon as let go of button, E1 comes up and will not clear using the 'clear' button, only thing to shut it up is to turn the key to something else!

HELP

Add a Message


This is a private posting area. A valid username and password combination is required to post messages to this discussion.
Username:  
Password:
Post as "Anonymous"

Administrator's Control Panel -- Board Moderators Only
Administer Page